Owner`s manual
[17] GETTING STARTED
www.uniden.com
System Reset
De-register the Handset
When you de-register a handset, the handset will also be removed from the base
index. The base must be in range and powered on before you can degister a
handset.
1) Press and hold end and # for more than 5 seconds. Select
Deregister HS
.
2) The phone will ask you to confirm the deregistration. Select
Yes
.
When the base information is deleted, the handset displays
MUST place the handset in base to register! Models may vary,
refer to Owners Manual for help
. Re-register the handset to the
base (see page 16).
Replacing the Base
If the base is unavailable for some reson, you can use the Replacing Base function
to de-register the handset. When you replace the base, the handset will not be
removed from the base index.
1) Press and hold end and # for more than 5 seconds. Select
Replacing Base
.
2) Select
Yes
.
3) You will hear a confirmation tone. The base information will be
deleted.
5[UVGO4GUGV
>GIKUVGT*5
4GRNCEKPI$CUG
5'.'%65'.'%6
5[UVGO4GUGV
>GIKUVGT*5
4GRNCEKPI$CUG
5'.'%65'.'%6
GETTING STARTED