Owner`s manual

GETTING STARTED [16] www.uniden.com
Registering Expansion Handsets
Handsets supplied with the phone are registered to the base by the factory. When
you register an extra handset to the base, the handset ID will be assigned.
Before the expansion handset is registered, the battery pack MUST be charged for
15-20 hours.
To register expansion handsets, follow the steps below:
1) Make sure the main base is in standby mode.
2) On the base, press the MENU soft key, and then select
HS Registration .
3) On the handset, press and hold # until you will hear a beep.
4) Press the OK soft key.
5) While the handset is registering,
Handset Registering will appear in the Handset
LCD. When
Registration Complete is displayed, the handset has been registered
to the base. If
Registration Failed appears, please try these steps again.
If a handset has ever
been registered to a
different base, you
must de-register the
handset before you
can register it to the
new base (see page
17).
note
GETTING STARTED