Specifications

If necessary, you can override the LO power output setting during an

emergency situation.

Warning: This is an emergency procedure and should be used

accordingly.

1. Press the PTT button on your microphone.

2. Press and hold HI/LO.

3. Releasing the HI/LO returns to LO output.

Transmitting with the SOLARA

1. Press the PTT button, to activate the

transmitter.

2. Release the PTT button, to end the

transmission.

Note: If the PTT button is held down and the power is turned on, a

warning tone sounds, the CH LED display begins to flash, and

the unit will not transmit. The SOLARA resets for normal

operation when the PTT button is released.

Transmitter Time-Out

If the PTT button on your microphone is held for more than 5-minutes,

the SOLARA transmitter automatically shuts off, a warning tone sounds,

and the TX LED display begins to flash. This prevents damage to your

receiver, and — in the event that the transmission is unintentional —

communication frequencies will not be jammed.

UT880ZL SOLARA 8/16/01 11:23 Page 11