Owner`s manual

39
Basic Operation
If you pressed No in Step 3, the scanner prompts you
to select the system and the group where you want to
store the frequency.
Quickly Recalling Channels
1. Press Hold to hold on any channel.
2. Press + Rcl. The scanner prompts you to select
the system where the channel is stored.
3. Rotate the scroll control to select the system, then
press E. The scanner prompts you to select the
channel group where the channel is stored.
4. Rotate the scroll control to select the group, then
press E.
If you selected a conventional system, the scanner
prompts you to select a channel. Rotate the scroll
control to select the channel, then press E to hold on
that channel.
Otherwise, if you selected a racing system, the
scanner automatically selects an active channel from
the car group and holds on that group.
Func