Specifications

8
5. Adjust RF GAIN knob (small)
to optimize reception in strong
signal areas.
6. Adjust MIC GAIN knob (large)
to adjust microphone sensitivity.
1. Select a channel.
2. Adjust
MIC GAIN .
3. When the channel is clear, press
the microphone PTT switch
and speak.
RF Meter : Measures RF Output
Power for transmitter. Press
microphone PTT switch to read
transmitting power.
S-Meter : Measures incoming signal
strength. The meter swings to indicate
signal strength. i.e. S 3, S 5, S 7 . . .
FFuunnccttiioonn MMeetteerr
Be sure to read and understand Part 95, FCC Rules and
Regulations before operating your transmitter.
Perform a voltage Standing Wave Ratio ( SWR )
measurement prior to using the transmitter. A SWR ratio
in excess of 2:1 may damage the transmitter
TToo TTrraannssmmiitt
PC68XL.qxd 3/15/99 1:30 PM Page 8