Specifications

Vancouver Police Service
Command
Production Specification
SVI #847 Page 83 of 107 September 18, 2012
UPPER LEVEL OPTICAL WARNING DEVICES
The upper-level optical warning devices shall be mounted as high and as close to the corner points of the apparatus as is
practical to define the clearance lines of the apparatus. The upper-level optical warning devices shall not be mounted
above the maximum height, specified by the device manufacturer.
ZONE A - FRONT WARNING LIGHTS
There shall be one (1) Whelen Edge FN60QLED LED 60" lightbar permanently mounted to the cab roof.
The lightbar configuration (streetside to curbside) shall be:
SECTION
INTERNAL COMPONENTS
LENS COLOR
1
Blue Side Linear LED
Clear
2
Blue Front Corner Linear LED
Clear
3
Clear Linear LED
Clear
4
Blue Linear LED
Clear
5
Blue Linear LED
Clear
6
Clear Linear LED (Opticom is specified)
Clear
7
Clear Linear LED (Opticom is specified)
Clear
8
Red Linear LED
Clear
9
Red Linear LED
Clear
10
Clear Linear LED
Clear
11
Red Front Corner Linear LED
Clear
12
Red Side Linear LED
Clear
All clear lights shall shut down when the parking brake is set to comply with "Blocking" mode requirements as outlined in
NFPA 1901.
The lightbar shall be separately switched at the vista display in the cab.
ZONES B AND D - SIDE WARNING LIGHTS
UPPER REAR CORNER WARNING LIGHTS
There shall be two (2) Whelen 900 series (9" x 7") Red/Blue split Linear Super-LED lights (90RB5FCR) provided, one (1)
each side. Each light shall have a clear lens and chrome flange.
The lights shall be switched at the Vista display in the cab.
UPPER FORWARD CORNER WARNING LIGHTS
There shall be two (2) Whelen 900 series (9" x 7") Red/Amber split Linear Super-LED lights (90RA5FCR) provided, one
(1) each side. Each light shall have a clear lens and chrome flange.
The lights shall be switched at the Vista display in the cab.