Specifications

Vancouver Police Service
Command
Production Specification
SVI #847 Page 80 of 107 September 18, 2012
CAB HAZARD WARNING LIGHT
A red flashing or rotating light, located in the driving compartment, shall be illuminated automatically whenever the
vehicles parking brake is not fully engaged and any of the following conditions exist:
• Any passenger or equipment compartment door is not closed.
• Any ladder or equipment rack is not in the stowed position.
• Stabilizer system is not in its stowed position.
• Powered light tower is not stowed.
• Any other device permanently attached to the apparatus is open, extended, or deployed in a manner that is likely to
cause damage to the apparatus if the apparatus is moved.
Compartments and equipment meeting all of the following conditions shall be permitted to be exempt from being wired to
the hazard light:
• The volume is less than or equal to 4 ft3 (0.1 m3).
• The compartment has an opening less than or equal to 144 in.2 (92,900 mm2).
• The open door does not extend sideways beyond the mirrors or up above the top of the fire apparatus.
• All equipment in the compartment is restrained so that nothing can fall out if the door is open while the apparatus is
moving.
• Manually raised pole lights with an extension of less than 5 ft (1.5 m).
The hazard light shall be labeled "DO NOT MOVE APPARATUS WHEN LIGHT IS ON".
An audible alarm shall be provided for the door ajar light.
BACK-UP ALARM
The body manufacturer shall furnish and install one (1) Brigade Electronics model BBS-107 self adjusting 87-107 dB(A)
electronic white noise back-up alarm. Back-up alarm to actuate automatically when the transmission gear selector is
placed in reverse.
REAR/SIDE VIEW CAMERA SYSTEM
There shall be one (1) Zone Defense rear/side observation camera system provided and installed on the apparatus. The
system shall include the following components:
• One (1) model CAM.313.SH.4P color camera with IR, high speed shutter mechanism, and automatic heater installed
on the rear the body.
• Two (2) model CAM.313.MS compact color cameras with IR installed on the left and right cab sides.
The camera feeds shall be viewable through the Vista Display when the apparatus is in motion, and the AMX system
when the apparatus is parked.
INTERIOR LED LIGHTS
Twelve (12) OnScene Solution model #70156, 10” x 10” x 7/8”, 10-30 VDC, surface mount dual red and white LED light(s)
with clear lens shall be provided throughout the vehicle. Each light shall be individually switched with a high/low intensity
setting switchable at the entry door(s). In addition light(s) will be capable of a 5 second delay after switching off.
• Eight (8) lights shall be located in the Command Room, evenly spaced
• Four (4) lights shall be located in the Negotiator Room, evenly spaced