Specifications

Vancouver Police Service
Command
Production Specification
SVI #847 Page 62 of 107 September 18, 2012
STREETSIDE INTERIOR AREA (IS2)
INTERIOR CABINET - COUNTER HEIGHT
There shall be one (1) interior counter height cabinet(s) provided on interior. Cabinet(s) shall be constructed of 1/8"
smooth finish aluminum, and painted with a hammer tone powder coat paint finish for a hard durable surface. Paint color
shall be gray. Each cabinet shall be approximately 34"L x 34"W x 42"H.
• The above cabinet(s) shall have a 4" x 4" toe kick area at the base to allow for the top surface to be used as a working
surface.
• The above cabinet(s) shall have double vertically hinged aluminum door(s) and painted with a hammer tone powder
coat paint finish to match cabinet color choice.
• There shall be one (1) vertically adjustable shelf in each of the above cabinets. It shall have a 1.25" lip to contain
items while minimizing space used.
INTERIOR CABINET - WORK SURFACE
There shall be a work surface (desk) installed above the multiple counter height cabinets. The work surface shall be
fabricated with 1/8" thick smooth aluminum, and painted with a hammer tone powder coat paint finish for a hard durable
surface. Paint color shall be gray.
INTERIOR CABINET - FULL HEIGHT
There shall be one (1) full height cabinet(s) provided on interior. Cabinet(s) shall be constructed of 1/8" smooth finish
aluminum, and painted with a hammer tone powder coat paint finish for a hard durable surface. Paint color shall be gray.
Each cabinet shall be approximately 34"L x 34"W x 66"H.
The cabinet shall be used to store the specified printers and shall include the following items:
• There shall be two (2) data port(s) provided in the cabinet
• There shall be two (2) 120 VAC, 20 amp, duplex straight-blade receptacle (NEMA 5-20R) outlet(s) provided
• One (1) OnScene 63" premium LED compartment light, vertically mounted.
− The above cabinet(s) shall have a ROM roll-up door, with un-painted finish.
• The roll-up door shall have an unpainted satin aluminum finish on the door slats and the door trim components.
• The door shall be equipped with a CPI harsh environment mechanical type door ajar switch located inside
compartment interior lower door track.
• There shall be NO keyed lock on this roll-up compartment door.
− There shall be two (2) vertically adjustable shelves in each of the above cabinets.