Specifications

Vancouver Police Service
Command
Production Specification
SVI #847 Page 61 of 107 September 18, 2012
REMOVABLE CONFERENCE TABLE
The interior of apparatus shall be provided with a conference table approximately 60" long by 36” wide located
approximately 30" from the floor. The table shall be designed with a central panel and two (2) fold down sides to
minimize the table area when not in use. The table sides shall be able to be lockable in either the folded or horizontal
positions. The exterior edges of the conference table shall be reinforced in order to support a person sitting on the edge of
the table.
The tabletop surface shall be fabricated of 3/16" smooth finish aluminum. The desk top shall be painted with a whiteboard
type paint finish.
There shall be a clear Lexan cover designed to overlay the table top surface. The cover shall be easily removable to allow
maps and other documents to be stored between the table top and Lexan cover, or removed to use the table top as a
writing surface.
The floor beneath the conference table shall include a recessed covered enclosure. The enclosure shall be
designed to hold the following components:
• There shall be one (1) VGA connection(s) with cable provided in the recessed center console. The connection shall
be wired to the Smartboard VGA outlet 2.
• There shall be one (1) phone connection provided in the recessed center console.
• There shall be one (1) coax outlet(s) with RG6 cable provided in the recessed center console. The connection shall
be wired to the specified audio/visual system.
• There shall be two (2) audio connection(s) with 22GA, two conductor cable provided in the recessed center console.
The connection shall be wired to the specified audio/video system.
• There shall be two (2) data port(s) provided in the recessed component console. The cabling shall terminate at the
equipment rack mount patch panel with 12" of slack per cable. A cable certification report confirming that all network
wiring complies with CAT6 specifications shall be included with the completed apparatus.
• There shall be one (1) 120 VAC, 20 amp, duplex straight-blade receptacle (NEMA 5-20R) outlet(s) provided in the
recessed component console.