Specifications

Vancouver Police Service
Command
Production Specification
SVI #847 Page 60 of 107 September 18, 2012
STREETSIDE INTERIOR AREA (IS1)
MAGNETIC SLIDING WHITEBOARD(S)
There shall be three (3) magnetic whiteboard(s), approximately 44" wide x 30" tall, located on tracks running along the top
surface of the street side lower cabinetry and the interior roof to support. The three (3) magnetic white boards shall be
able to be positioned anywhere along the streetside wall of the Command Room from the equipment rack to the front wall.
INTERIOR CABINET - COUNTER HEIGHT
There shall be two (2) interior counter height cabinet(s) provided on interior. Cabinet(s) shall be constructed of 1/8"
smooth finish aluminum, and painted with a hammer tone powder coat paint finish for a hard durable surface. Paint color
shall be gray. Each cabinet shall be approximately 34"L x 34"W x 42"H.
• The above cabinet(s) shall have a 4" x 4" toe kick area at the base to allow for the top surface to be used as a working
surface.
• The above cabinet(s) shall have double vertically hinged aluminum door(s) and painted with a hammer tone powder
coat paint finish to match cabinet color choice.
• There shall be one (1) vertically adjustable shelf in each of the above cabinets. It shall have a 1.25" lip to contain
items while minimizing space used.
INTERIOR CABINET - WORK SURFACE
There shall be a work surface (desk) installed above the multiple counter height cabinets. The work surface shall be
fabricated with 1/8" thick smooth aluminum, and painted with a hammer tone powder coat paint finish for a hard durable
surface. Paint color shall be gray.
INTERIOR ROLL-AROUND CHAIR
There shall be three (3) Vecta Rocky 4 Star roll-around office chairs provided at the command desk area. The chairs shall
include the following features:
• Four-prong Rocky nesting base: one piece, solid color glass-filled nylon in graphite only
• Hip pivoting springs for lumbar support
• Hard, dual-wheel casters for use on carpet: black plastic
• Upholstered seat and back molded urethane foam over injection-molded polypropylene inner shell(s)
• Folding seat with pneumatic self-aligning features
• Pneumatic height adjustment
• Zero front rise
The chairs shall be designed to nest together and include provisions to fully secure under the desk(s) when not in use and
the apparatus is in motion.