Specifications

Vancouver Police Service
Command
Production Specification
SVI #847 Page 51 of 107 September 18, 2012
CURBSIDE COMPARTMENT - AHEAD OF REAR WHEEL (C2)
The interior useable compartment space shall be approximately 70.0" wide.
The compartment door opening shall be approximately 63.0" wide.
This compartment shall have a horizontally hinged box pan style door fabricated of 1/8" thick smooth aluminum. The inner
liner of the door shall be 1/8" thick smooth aluminum with an unpainted finish. The door exterior shall be painted job color.
The hinged door(s) shall have a stainless steel 6" offset bent D-ring locking handle. A gasket shall be placed between
stainless steel handle and door. Door latches shall be a two-point rotary slam, double-catch latch, recessed inside the
double panel door with striker plate.
The hinged door(s) shall have a pair of tailgate style mechanisms to stop the door at 90 degrees. Each door shall be
capable of being closed without unlatching.
• There shall be one (1) 400 lbs. slide-out tray(s) approximately 24" deep and as wide as the compartment layout or
door opening permits. The tray top shall be fabricated from 3/16" 3003 aluminum sheet with a 3" vertical lip and
welded corners to form a box type tray surface. The sliding tracks shall extend 100% of the slide length. The tray
assembly shall utilize a pneumatic cylinder mounted on underside to hold the tray in both the extended and closed
positions.
The tray shall be used to store the specified removable staircase and shall contain provisions for such.
• One (1) OnScene 36" Premium LED compartment light, horizontally mounted at the top of the compartment toward
the door opening.
• Two (2) 3-1/2" x 3-1/2" black plastic louvered vents shall be provided in the lower compartment.