Specifications

Vancouver Police Service
Command
Production Specification
SVI #847 Page 48 of 107 September 18, 2012
STREETSIDE COMPARTMENT - REAR (S3)
The interior useable compartment width shall be approximately 64.0" wide.
The compartment door opening shall be approximately 57.0" wide.
This compartment shall have a horizontally hinged box pan style door fabricated of 1/8" thick smooth aluminum. The inner
liner of the door shall be 1/8" thick smooth aluminum with an unpainted finish. The door exterior shall be painted job color.
The hinged door(s) shall have a stainless steel 6" offset bent D-ring locking handle. A gasket shall be placed between
stainless steel handle and door. Door latches shall be a two-point rotary slam, double-catch latch, recessed inside the
double panel door with striker plate.
The hinged door(s) shall have a pair of tailgate style mechanisms to stop the door at 90 degrees. Each door shall be
capable of being closed without unlatching.
• One (1) Hannay ECR1618-17-18 electric cable reel(s) capable of storing 200' of 10/3 electric cable. Reel(s) shall be
designed to hold 110% of the capacity of cord length, with fully enclosed 45 amp, three (3) conductor collector rings.
Reel(s) shall be mounted to channel structure that allows for side-to-side adjustment of reel position.
− Power rewind control(s) shall be in a position where the operator can observe the rewinding operation and not be
more than 72 in. (1830 mm) above the operator’s standing position, and shall be marked with a label indicating its
function.
− A label shall be provided in a visible location adjacent to reel with following information: Current rating, Current
type, Phase, Voltage, and Total cord length.
− The cable reel shall equipped with 200' of 10/3 SEOW black cable, a molded plastic ball clamp, and a single
heavy duty L5-30 twist-lock female plug at the end.
• One (1) Akron model EJB, cast aluminum electrical power distribution box with yellow powder coat painted finish shall
be provided. The power distribution box shall meet all requirements described in NFPA 1901. The power distribution
box shall include:
− A 12" pigtail that terminates in an L5-30 configuration to match the cable on the cord reel. The outlet configuration
shall include:
− One (1) 5-20 duplex straight-blade receptacle
− One (1) 5-20 duplex straight-blade receptacle
− One (1) 5-20 duplex straight-blade receptacle
− One (1) 5-20 duplex straight-blade receptacle
• One (1) Akron EJB treadplate vertical apparatus mounting bracket shall be provided.
− The fairlead roller shall be mounted directly to the reel.
• One (1) OnScene 36" Premium LED compartment light, horizontally mounted at the top of the compartment toward
the door opening.
− Two (2) 3-1/2" x 3-1/2" black plastic louvered vents shall be provided in the lower compartment.