Specifications

Vancouver Police Service
Command
Production Specification
SVI #847 Page 47 of 107 September 18, 2012
STREETSIDE COMPARTMENT - AHEAD OF REAR WHEELS (S2)
The interior useable compartment space shall be approximately 70.0" wide.
The compartment door opening shall be approximately 63.0" wide.
This compartment shall have vertically hinged box pan style doors fabricated of 1/8" thick smooth aluminum. The inner
liner of the door shall be 1/8" thick smooth aluminum with an unpainted finish. The door exterior shall be painted job color.
The hinged door(s) shall have a stainless steel 6" offset bent D-ring locking handle. A gasket shall be placed between
stainless steel handle and door. Door latches shall be a two-point rotary slam, double-catch latch, recessed inside the
double panel door with striker plate.
The hinged door(s) shall have a pneumatic cylinder to hold door in the open and closed positions. Each door shall be
capable of being closed without unlatching. Door checks shall be bolted to the upper compartment door header and the
box pan of the door.
A compartment threshold protection plate shall be installed on the bottom edge of the compartment door opening. The
threshold protection shall be fabricated from an aluminum extrusion with an anodized exterior finish.
• One (1) OnScene 36" Premium LED compartment light, horizontally mounted at the top of the compartment toward
the door opening.
• The diesel engine driven generator location.
• Two (2) 3-1/2" x 3-1/2" black plastic louvered vents shall be provided in the lower compartment.