Specifications

Vancouver Police Service
Command
Production Specification
SVI #847 Page 45 of 107 September 18, 2012
BODY HEIGHT MEASUREMENTS
The vertical body dimensions shall be as follows:
AHEAD OF REAR AXLE
Description
Dimension
A
Bottom of Subframe to Top of Body
89.0"
B
Bottom of Subframe to Bottom of Body
22.5"
C
Vertical Door Opening - (Full Height Compartment)
-with roll-up door
67.5"
-with hinged door
71.5"
Vertical Door Opening - (Short Compartment)
-with hinged door
20.0"
ABOVE REAR AXLE
Description
Dimension
D
Vertical Door Opening - Above Rear Wheel
-with roll-up door
34.0"
-with hinged door
37.0"
BEHIND REAR AXLE
Description
Dimension
E
Bottom of Subframe to Bottom of Body
22.5"
F
Vertical Door Opening - (Full Height Compartment)
-with roll-up door
62.0"
-with hinged door
66.0"
Vertical Door Opening - (Short Compartment)
-with hinged door
17.5"
GENERAL
Description
Dimension
G
Bottom of Drip Rail to Top of Body
38.5"
H
Walk-in Interior Height
78.0" (min)
(Dimensions are generic and subject to change during the actual design process)
BODY WIDTH DIMENSIONS
The body shall be 100.0" wide, not including drip rail or non-permanent fixtures. Interior compartment depth dimensions
shall be approximately:
Area Description Dimension
Transverse Area above Subframe 95.0"
Compartment Depth below Subframe 24.5"