Specifications

24
UNIDEN EZI30XLT Scanner
Keep the scanner dry. If it gets wet, wipe it dry immediately. Use
and store the scanner only in normal temperature environments.
Handle the scanner carefully: do not drop it. Keep the scanner
away from dust and dirt, and wipe it with a damp cloth
occasionally to keep it looking new.
General Use
• Always write down the programmed frequencies in the event
of memory loss.
• If memory is lost, simply reprogram each channel. The
display shows - - - - - - in all channels when there has been a
memory loss.
• Always press each button rmly until you hear the entry tone
for that key entry.
Location
• Do not use the scanner in high-moisture environments such
as the kitchen or bathroom.
• Avoid placing the unit in direct sunlight or near heating elements
or vents.
• If the scanner receives strong interference or electrical noise,
move it or its antenna away from the source of the noise. If
possible, a higher elevation might provide better reception.
• Also try changing the height or angle of the antenna.
Cleaning
• Clean the outside of the scanner with a mild detergent.
• To prevent scratches, do not use abrasive cleaners or
solvents. Be careful not to rub the LCD window.
• Do not use excessive amounts of water.
Repairs
Do not attempt any repair. The scanner contains no user
serviceable parts.
Birdies
All radios can receive “birdies” (undesired signals). If your
scanner stops during Scan mode and no sound is heard, it might
be receiving a birdie. Birdies are internally generated signals
inherent in the electronics of the receiver.
Press
/ to resume scanning.
CARE AND MAINTENANCE