Specifications

22
UNIDEN EZI30XLT Scanner
If your EZI30XLT is not performing properly, try the following
steps.
Problem Possible Cause Suggestion
Improper
reception.
The scanner’s
antenna might
need to be
adjusted.
Check the antenna
connection or move or
reposition the antenna.
Move the scanner.
You might be in a remote area
that could require an optional
multi-band antenna. Check
with your dealer or local
electronics store.
Scan
won’t
stop.
The squelch
might need to be
adjusted.
Adjust the squelch threshold.
See “To adjust the squelch” on
page 17.
The antenna
might need to be
adjusted.
Check the antenna
connection.
The channel’s
frequency might
not be stored in
favourites.
Make sure the channel’s
frequency is stored in the
scanner’s favourites bank.
The channel might
not be active.
Wait for a transmission on
the channel.
Scan
won’t
start.
You must be
service or
favourites mode.
Press (Srvc/Fav). If
HOLD
is showing press (Hold) to
resume.
The squelch
might need to be
adjusted.
Adjust the squelch threshold.
See “To adjust the squelch” on
page 17.
The antenna
might need to be
adjusted.
Check the antenna
connection.
TROUBLESHOOTING