Specifications

Installing the Base Unit on a Desk or Tabletop

Note: Refer to the foldout located in the back of this Operating Guide to

help familiarize you with the controls of your cordless phone.

1. Place the Base Unit on a desk

or tabletop, and plug one end

of the long Telephone Line

Cord(s) (supplied) into the

“

TEL LINE”

jack(s)

on the Base.

2. Plug the other end of the

Telephone Line Cord(s) into

the telephone wall jack(s).

3. Plug the AC Adapter cord into

the AC Adapter input jack on

the Base Unit. (

Note:

Use

only the AC Adapter supplied

with the

EXP 9200

)

4. Plug the AC Adapter into a standard 120V AC wall outlet.

5. Route the power cord where it will not create a trip hazard, or where it

could become chafed and create a fire or other electrical hazards.

Placing the Handset on the Base Unit

The unique design of your

EXP 9200

allows you to place the Handset on the

Base Unit either face down or in an upright position.

The Battery Pack in the Handset automatically recharges in either position.