Specifications

3. Press MEMO and a number (01-20) for the memory location.
Note:
After pressing MEMO the second time, you have 20 seconds to
enter the number you wish to store. Otherwise, an error tone will
sound and the unit returns to Standby.
You will hear a confirmation beep and the SP. PHONE LED goes out.
4. Write the stored number and its memory location number on one of the
enclosed stickers.
Example: Store 555-1234 in memory location 12:
a. Press MEMO
b. Press 5551234
c. Press MEMO
d. Press 12
The Base Unit beeps confirmation and the SP. PHONE LED goes out.
Storing a One-Touch Dialing Number
1. Follow steps 1 and 2 above in “Storing a Number,” then:
2. Press
MEMO and the ONE-TOUCH DIALING button ( A, B, or C ) you wish to
program.
The Base Unit beeps confirmation and the
SP. PHONE LED goes out.
Example: Store 555-1234 in One-Touch button B:
a. Press MEMO
b. Press 5551234
c. Press MEMO
d. Press
B
Base Unit beeps confirmation and the SP. PHONE LED goes out.
Storing Mixed Tone/Pulse Numbers
If your Base Unit is set up for Pulse Dialing, you can store a mixed mode
number (up to 16 digits) to easily access long distance services or other
services requiring Tone inputs.
Note:
Memory storage can be changed only on the Base Unit.
1. Follow steps 1 and 2 in “Storing a Number.”
2. Enter the number to be dialed in Pulse Mode.
3. Press the
/TONE button on the Base Unit.
Note:
The /TONE button counts as one digit and enters a four second
delay.
4. Enter the number to be dialed in Tone Mode. If desired, press RDL/P to
enter delays between numbers.
5. Follow steps 4 and 5 in “Storing a Number.”
✱
✱
20