Specifications

Keypad Lights
The Handset Keypad Lights flash when a call is received and remain lit
for 10 seconds. Also, pressing any button turns the Keypad Lights on for
10 seconds.
Answering a Call from the Base Unit
1. The Base Unit rings (two rings for Line 1, three rings for Line 2), and the
corresponding green Line LED flashes.
2. Press the flashing Line Button or the
SP. PHONE button. Speak into the
Base Unit microphone.
Note:
If both Line 1 and Line 2 are ringing, press SP. PHONE to answer the
last line used.
3. When you finish the call, press SP. PHONE to hang up.
Answering a Call from the Handset
1. The Handset rings (two rings for Line 1, three rings for line 2), and the
corresponding green Line LED and Keypad Lights flash.
2. If the Handset is not in the Base Unit, press the flashing Line Button, or
TALK to answer the call.
—OR—
If the Handset is in the Base Unit, the
AutoTalk feature allows you to
answer the call by simply picking up the Handset and beginning your
conversation.
Note:
If both Line 1 and Line 2 are ringing, press TALK or lift the Handset
from the Base Unit to answer the last line used.
3. When you finish the call, place the Handset back on the Base Unit.
AutoStandby automatically hangs up the phone. There is no need to press
TALK to hang up.
—OR—
If the Handset is away from the Base Unit, press
TALK to hang up the
phone.
Making a Call from the Base Unit
1. Press
SP. PHONE, LINE 1 , or LINE 2 .
Note:
When SP. PHONE is pressed, the EXP 9200 returns to the last line
used.
2. When the LINE 1 or LINE 2 LED glows steadily and you hear a dial tone, dial
the number you are calling by pressing the numbers on the keypad or
using one of the memory features (See “Using Your EXP 9200 Memory.”)
3. When you finish the call, press
SP. PHONE to hang up.
16