Specifications

5. Plug the AC Adapter into a standard 120V AC wall outlet.

6. Route the power cord where it will not create a trip hazard, or where it will

not become chafed and create a fire or other electrical hazards.

If you do not have a standard wall plate, you can mount the Base Unit directly on a wall.

Mounting Directly on a Wall

1. Carefully select a location away from electrical cables, pipes, or other

items behind the mounting location that could cause a hazard when

inserting screws into the wall.

2. Insert the two mounting screws 3

⁄

inches apart vertically, allowing about

⁄

of an inch between the wall and screw heads for mounting the phone.

Make sure the screws are securely fastened, and that the wall material is

capable of supporting the weight of the Base Unit; otherwise, damage to

the Base Unit could result.

3. Plug one end of the Telephone Line Cord(s) (supplied) into the “TEL LINE”

jack(s) on the Base Unit. Lay the cord(s) inside the molding on the Wall

Mount Adapter connected to the Base Unit.

4. Plug the AC Adapter cord into the AC Adapter input jack on the Base Unit.

Note

Use only the AC

Adapter supplied with

the

EXP 9200

Place the cord inside the

molded channel on the Wall

Mount Adapter connected to

the Base Unit.

5. Place the Base Unit onto the

mounting screws and slide

downward to secure. Then

hang the Handset on the

Base Unit.

5. Plug the other end of the

Telephone Line Cord(s) into

the telephone wall jack(s).

7. Plug the AC Adapter into a

standard 120V AC wall

outlet.

8. Route the power cord where it will not create a trip hazard, or where it will

not become chafed and create a fire or other electrical hazards.