Specifications
Table Of Contents
- CONTENTS
- Illustrations (Base Unit Controls and Functions)
- Illustrations (Handset Controls and Functions)
- Important Safety Instructions
- About Your EXP 9100 4
- EXP 9100 Features 5
- Installing Your EXP 9100 7
- Using your EXP 9100
- Preparing the Base Unit and Handset 14
- During a Call 14
- Handset Earpiece Volume 14
- Mute Mode 14
- Out of Range Indicator 14
- Keypad Lights 14
- Answering a Call 15
- Making a Call 15
- Dialing a Stored Number 15
- Chain Dialing 16
- Special Features 16
- Placing a Call On Hold 16
- Monitoring a Call 16
- Using the Flash/R. Tone Button 16
- Last Number Redial
- Using Your EXP 9100 Memory 17
- Storing a Number 17
- Storing a One-Touch Dialing Number 17
- Storing Mixed Tone/Pulse Numbers 18
- Erasing a Stored Number 18
- Using your EXP 9100 Intercom 18
- Paging from the Base Unit 19
- Paging the Base Unit While a Call is Holding 19
- Paging from the Handset to the Base Unit 19
- Using the EXP 9100 as a Room Monitor 19
- Troubleshooting 20
- Specifications 22
- Cover
- Precautions
- One-Year Limited Warranty
- Back Cover
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electrical shock, and injury to persons,
including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning.
Do
not
use
liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
4.
Do
not
use this product near water; for example, near a bath tub, wash
bowl, kitchen sink or laundry tub, in a wet basement, or near a
swimming pool.
5.
Do
not
place this product on an unstable cart, stand, or table. The
telephone may fall, causing serious damage to the unit.
6. Slots and openings in the cabinet and the back or bottom are provided
for ventilation. To protect the product from overheating, these openings
must not be blocked or covered. These openings should never be
blocked by placing the product on the bed, sofa, rug, or other similar
surface. This product should never be placed near or over a radiator or
heat register. This product should not be placed in a built-in installation
unless proper ventilation is provided.
7. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power company.
8.
Do not
allow anything to rest on the power cord. Do not locate this
product where the cord will be damaged by persons walking on it.
9.
Do not
overload wall outlets and extension cords, as this can result in
the risk of fire or electrical shock.
10. Never push objects of any kind into this product through cabinet slots, as
they may touch dangerous voltage points or short out parts that could
result in a risk of fire or electric shock. Never spill liquid of any kind on
the product.
11. To reduce the risk of electric shock, do not assemble this product. Take
it to qualified service personnel when some service or repair work is
required. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock
when the appliance is subsequently used.
2