Specifications

Using Your EXP 9100 Memory
Storing a Number
1. Remove the Handset from the Base Unit
2. Press
MEMO (The TALK
LED lights and you hear a beep.)
3. Enter the number (up to 16 digits) you want to store.
You may enter a delay between numbers (for accessing a switchboard,
or long distance service) by pressing
RDL/P at the point in the number
sequence you wish to pause. (
Note:
The RDL/P button counts as one
digit.
) Pressing RDL/P
more than once will increase the length of the
pause between numbers.
4. Press
MEMO
and a number
(01-20) for the memory location.
After pressing MEMO the second time, you have 20 seconds to
enter the number you wish to store. Otherwise, an error tone will
sound and the unit returns to stand-by.
You will hear a confirmation beep and the TALK LED goes out.
5. Write the stored number and its memory location number on one of the
enclosed stickers.
Example: Store 555-1234 in memory location 12:
a. Press MEMO
b. Press 5551234
c. Press
MEMO
d. Press 12
The Handset beeps confirmation and the TALK LED goes out.
Storing a One-Touch Dialing Number:
1. Follow steps 1 - 3 above in “Storing a Number,” then:
2. Press
MEMO and the ONE-TOUCH DIALING button ( A, B, or C ) you wish to
program. The Handset beeps confirmation and the
TALK LED goes out.
Example: Store 555-1234 in One-Touch button B:
a. Press MEMO
b. Press 5551234
c. Press MEMO
d. Press
B
Handset beeps confirmation and the TALK LED goes out.
17