Specifications

Chain Dialing
On certain occasions, after dialing a number, you may be requested by the
party or service you are calling to enter a special access code, such as when
performing a banking transaction.
1. Remove the Handset from the Base Unit.
2. Store the access code into one of the memory numbers. (See “Using
Your EXP 9100 Memory.”)
3. After dialing the main number, press
MEMO and the memory number of
the access code at the appropriate time.
Example:
a. Dial the number for your bank.
- When the bank requests your account number:
b. Press
MEMO
c. Press the memory location number for your account number.
Your Handset dials the number and you may proceed with your
transaction.
Special Features
Placing a Call On Hold
1. Press
HOLD on the Handset during the call, and the TALK LED flashes.
NOTE: If you wish to page the Base Unit while the call is holding, refer to the
section “Using your
EXP 9100 Intercom.”
2. To pick up the call holding, press TALK on the Handset.
Monitoring a Call
Press
MONITOR on the Handset during a call. This feature amplifies the earpiece
audio through the Monitor Speaker on the Handset so you can monitor a call
without having the phone next to the ear. The Handset microphone is turned off
during monitoring.
Using the
FLASH/R. TONE Button
Press the
FLASH/R. TONE button while operating the Handset. This feature
sends a timed “hook-flash” on the telephone line for accessing services such
as Call Waiting, etc.
Last Number Redial
Press
RDL/P to dial the last number that you called. This feature is extremely
useful when the number you called is busy.
NOTE: If any other key is pressed before RDL/P, the phone will not redial
the last number.
16