Specifications
Table Of Contents
- CONTENTS
- Illustrations (Base Unit Controls and Functions)
- Illustrations (Handset Controls and Functions)
- Important Safety Instructions
- About Your EXP 9100 4
- EXP 9100 Features 5
- Installing Your EXP 9100 7
- Using your EXP 9100
- Preparing the Base Unit and Handset 14
- During a Call 14
- Handset Earpiece Volume 14
- Mute Mode 14
- Out of Range Indicator 14
- Keypad Lights 14
- Answering a Call 15
- Making a Call 15
- Dialing a Stored Number 15
- Chain Dialing 16
- Special Features 16
- Placing a Call On Hold 16
- Monitoring a Call 16
- Using the Flash/R. Tone Button 16
- Last Number Redial
- Using Your EXP 9100 Memory 17
- Storing a Number 17
- Storing a One-Touch Dialing Number 17
- Storing Mixed Tone/Pulse Numbers 18
- Erasing a Stored Number 18
- Using your EXP 9100 Intercom 18
- Paging from the Base Unit 19
- Paging the Base Unit While a Call is Holding 19
- Paging from the Handset to the Base Unit 19
- Using the EXP 9100 as a Room Monitor 19
- Troubleshooting 20
- Specifications 22
- Cover
- Precautions
- One-Year Limited Warranty
- Back Cover
4. Plug the AC Adapter cord into
the AC Adapter input jack on
the Base Unit.
(Note:
Use only the AC
Adapter supplied with the
EXP 9100
.
) Place the cord
inside the molded channel on
the Wall Mount Adapter
connected to the Base Unit.
5. Place the Base Unit onto the
mounting screws and slide
downward to secure. Then
hang the Handset on the
Base Unit.
5. Plug the other end of the
Telephone Line Cord into the
telephone wall jack.
7. Plug the AC Adapter into a
standard 120V AC wall outlet.
8. Route the power cord where it will not create a trip hazard, or where it
will not become chafed and create a fire or other electrical hazards.
Installing the Battery Pack (BT-9100)
1. Remove the battery compartment
cover on the Handset by sliding it
down.
2. Slide in the Nickel-Cadmium
Battery Pack (Note:
The Battery
Pack is keyed to fit so the electrical
contacts touch the Handset’s
electrical contacts.
)
3. Slide the battery compartment
cover back on.
After removing the Battery Pack, the
built-in Memory Backup feature allows
up to 3 minutes to install a charged
Battery Pack. This feature prevents
losing any phone numbers that may be
stored in the telephone’s memory.
11