User guide

AirMagnet Spectrum XT User Guide
Chapter 6: Analyzing Spectrum Data 77
Figure 6-13: Channel Duty Cycle graph
Configuring Channel Duty Cycle Graph Parameters
You can set or change the parameters in the Channel Duty Cycle graph using the Chart
Configuration button.
To configure Channel Duty Cycle graph parameters:
1) From the upper-right corner of the Channel Duty Cycle graph, click (Chart
Configuration). The Channel Duty Cycle Configuration dialog box. See Figure 6-14.
Figure 6-14: Configuring Channel Duty Cycle graph
2)
Make the desired selections and/or entries as described in Table 6-5.
3) Click Apply and then OK.