User guide

AirMagnet Spectrum XT User Guide
Chapter 6: Analyzing Spectrum Data 75
To configure Channel Power graph parameters:
1) From the upper-right corner of the Channel Power graph, click (Chart
Configuration). The Channel Power Configuration dialog box. See Figure 6-12.
Figure 6-12: Configuring Channel Power graph
2) Make the desired selections and/or entries as described in Table 6-5.
3) Click Apply and then OK.
Table 6-5: Configuring Channel Power Graph Parameters
Parameter Description
Show Average Allows the user to show or hide the average power (aqua) readings in Channel
Power graph. Click in the field and select one of the following:
• Yes - shows the average power in the graph (default).
• No - hide the average power in the graph.
Show Maximum Allows the user to show or hide the maximum power (blue) readings in the
graph. Click in the field and select one of the following:
• Yes - shows the maximum power in the graph (default).
• No - hide the maximum power in the graph.