User guide

72 Chapter 6: Analyzing Spectrum Data
AirMagnet Spectrum XT User Guide
To configure Spectrogram graph parameters:
1) From the upper-right corner of the Spectrogram graph, click (Chart
Configuration). The Spectrogram Configuration dialog box appears. See Figure 6-10.
Figure 6-10: Configuring Spectrogram graph
2) Make the desired selections and/or entries as described in Table 6-4.
3) Click Apply and then OK.
Table 6-4: Configuring Spectrogram Graph Parameters
Parameter Description
View Type Allows the user to decide which type of spectrum data to be displayed in the
Spectrogram graph. Click in the field and use the down arrow to select one of
the following:
• Current - plots Current power readings.
• Average - plots the average power reading of the latest five sweeps.
• Maximum - plots the maximum power reading of the latest five sweeps.
• Duty Cycle - plots Duty Cycle readings.
Scroll Type This option allows you to set the direction in which the graph scrolls (e.g., up
or down).