User guide

52 Chapter 5: Auto Pattern Detection and Custom Device Classification
AirMagnet Spectrum XT User Guide
Note: If a pattern is no longer detected after one minute, it will be removed from the Detected
Patterns list and the pattern count will be reduced by one to reflect that the pattern is no longer
detected.
This window may be opened by two methods:
• Double-click the “Auto detected FFT Patterns” line item under “Interferers &
Devices”
• From the Gear drop-down, select “Show Auto Detected Patterns”
With this window open, you will see the list of detected patterns on the left. The highlighted
pattern will be displayed in the FFT graph on the right (zoomed-in is the default). The pattern
will either be “Max” or “Current” data depending on how the pattern was originally detected.
The color coded legend in the upper right of the graph will indicate whether the data is “Max”
or “Current.”
The legend above the patterns indicates that if a custom signature was previously created for a
particular pattern, it will be highlighted in blue (as shown in the bottom pattern in Figure 5-2).
Figure 5-2: Auto Detect FFT Patterns window