User guide

48 Chapter 4: Menus and Tools
AirMagnet Spectrum XT User Guide
Automatically Saving Current View
To let AirMagnet Spectrum XT automatically save the current view:
1) From the toolbar, click Settings>Configure.
2) Under the General tab, check Auto Save Custom View.
3) Click Apply and then OK.
Once the Auto Save Custom View option is enabled, AirMagnet Spectrum XT will
automatically save the custom view you have created before ending the current session and open in
the same view at the next start.
Manually Saving Current View
If you have not enabled the Auto Save Custom View option in the Configure dialog box
(as discussed in the previous paragraph), you have to manually save the custom view that you
have created before exiting the application by following the instructions outlined below.
Otherwise, a message will pop up when you are trying to close the application, asking if you
want to save the current view before exiting. It is then up to you to decide whether to save the
current view or not.
To save the current view manually:
1) Open the graph or graphs of your choice.
2) From the toolbar, click Easy View>Add Current View....
3) From the New Easy View dialog box, name the current view and click OK.
4) With the current view you have just added shown on the screen, click Easy View>Save
Current View.
Copying a Graph into Other Applications
AirMagnet Spectrum XT allows the user to easily copy any graph in the graph window as still
images and paste them to other applications such as Paint, MS Word, etc. This makes it very
convenient for saving and sharing data captured on the network.
To copy and paste a graph into another application:
1) Right-click a chart or graph of interest.
2) From the pop-up menu, select Copy Image. See Figure 4-19.