User guide

136 Chapter 10: Device Detection
AirMagnet Spectrum XT User Guide
• Conduct regular WLAN site RF surveys to determine the proper location and use of RF Signal
Generators, if they are necessary.
• If it is necessary to use the RF Signal Generator, only use it on channels that do not overlap
with the channels used by your WLAN.
• If optimal WLAN performance is not an issue, you may continue to use your RF Signal
Generator along with your WLANs, and try to maximize the distance between APs and RF
Signal Generator to minimize their RF interference.
.
Figure 10-14: Interference Source - AiHorn Signal Generator
Non-Bluetooth Wireless Mouse
Since the 2.4 GHz and 5 GHz wireless spectrums are unregulated, companies are allowed to
use those bands for more than just WLAN traffic. In response to some of the concerns about
the interference between WLAN and Bluetooth networks, or between WLAN and continuous
transmitter technologies like some cordless phones, some companies have developed