Owner's Manual

EXP1240 System Installation Guide Revision 06

6) After the base station reboots, verify the time settings updates.

∘ Check the Home/Status screen to be sure the time has updated correctly.

∘ Check the Time screen to verify that the time server IP address is still

correct.

Figure 15: Checking time settings updates

Configuring the SIP Server Settings

1) If necessary, go to the

Network screen (Figure 13) and verify that the parameters under

the SIP/RTP Settings are correct.

2) In the left panel of the screen, select Servers. This opens the Servers screen.

Figure 16:

Servers

screen

3) Click Add Server, then enter the necessary information for the first SIP server.