Owner's Manual

EXP1240 Admin Guide, Version 2.0
Proprietary and Confidential
Chapter: About This Document
6
1 About This Document
This document describes the configuration, customization, management, operation, maintenance and
trouble shooting of the EXP1240 System (EXP1240 base, and EXP1240 handset) in UNIDEN generic mode.
For customer specific modes refer to specific customer agreements, which describe the software
operational deviations from this document. For handset detailed user guide refer to [1].
1.1 Audience
Who should read this guide? First, this guide is intended for networking professionals responsible for
designing and implementing UNIDEN based enterprise networks.
Second, network administrators and IT support personnel that need to install, configure, maintain and
monitor elements in a “live” EXP1240 network will find this document helpful. Furthermore, anyone who
wishes to gain knowledge on fundamental features in the BeatUs system can also benefit from this
material.
1.2 When Should I Read This Guide
Read this guide before you install the core network devices of VoIP EXP1240 System and when you are
ready to setup or configure SIP server, NAT aware router, advanced VLAN settings, base stations, and multi
cell setup.
This manual will enable you to set up components in your network to communicate with each other and
also deploy a fully functionally VoIP EXP1240 System.
1.3 Important Assumptions
This document was written with the following assumptions in mind:
1) You have understanding of network deployment in general
2) You have working knowledge of basic TCP/IP/SIP protocols, Network Address Translation, etc...
3) A proper site survey has been performed, and the administrator have access to these plans
1.4 What’s Inside This Guide
We summarize the contents of this document in the table below:
Where Is It? Content Purpose
Chapter 2
Introduction to the
EXP1240
Network
To gain knowledge about the different elements in a
typical EXP1240 Network
Chapter 3
Installation of Base
station/Repeater
Con
siderations to remember before unwrapping and
installing base units and repeaters
Chapter 4
Making Handsets Ready
To determine precautions to take in preparing
handsets for use in the system
Chapter 5
EXP1240
Administration
Interface
To learn about the
Configuration Interface and define
full meaning of various parameters needed to be setup
in the system.
Chapter 6
Multi
-
Cell Setup &
Management
Learn how
to add servers and
setup multiple bases
into a multi-cell network