Owner's Manual

EXP1240 Admin Guide, Version 2.0

Proprietary and Confidential

Chapter: EXP1240 Administration Interface

Parameters

Description

Idx

System counter

IPEI

Repeater unique DECT identifier

RPN

SINGLE CELL SYSTEM:

The base has always RPN00, first repeater will then be RPN01, second repeater

RPN02 and third RPN03 (3 repeaters maximum per base)

MULTI CELL SYSTEM:

Bases are increment by 2^2 in hex, means first base RPN00 second base RPN04

etc., in between RPN01, 02, 03 addressed for repeaters at Primary base and 05,

06, 07 addressed for Secondary base (3 repeaters maximum per base)

DECT sync source

Select the

base or repeater the rep

eater has to be synchronized to.

5.13.1.2 Local Automatic

Repeater controlled by auto detects best base signal and auto assign RPN. The RPN and DECT sync source

are greyed out.

The repeater RPN is dynamic assigned in base RPN range.

With local automatical mode repeater on repeater (chain) is not supported.

5.13.2 Register Repeater

Adding a repeater makes it possible to register the repeater. Registration is made by select the repeater

and pressing register repeater. The base window for repeater registration will be open until the registration

is stopped. By stopping the registration all registration on the system will be stopped inclusive handset

registration.