Owner's Manual

EXP1240 Admin Guide, Version 2.0

Proprietary and Confidential

Chapter: EXP1240 Administration Interface

Connected:

The relevant Base station(s) is online in the network

Connection Loss: Base station unexpectedly lost connection to network

This Unit: Current Base station whose http Web Interface is currently being

accessed

DECT Sync

source

With setting “Auto configure DECT sync source tree” set to Enable, this three will

automatically be generated. If manual configured the administrator should

choose the relevant “multi cell chain” level its wants a specific Base unit be

placed. Maximum number of “multi-cell chain” levels is 12.

Format of the selection: “AAAAAxx: RPNyy (-zz dBm)”

AAAAA: indication of sync. source for the base. Can be “Primary” or “Level xx”

xx: Sync. source base sync. level

yy: Sync. source base RPN

zz: RSSI level of sync. source base seen from the actual base

“(Any) RPN”: When a base is not synchronized to other base. State after reboot of

chain.

Dect Property

Base station characteristics in connection to the current multi cell network.

Possible Output(s)

Primary: Main Base station unto which all other nodes in the chain synchronises

to.

Locked: The Base unit is currently synchronized and locked to the master Base

unit.

Searching: Base unit in the process of locating to a Master/slave as specified in

Dect sync source

Free Running: A locked Base unit that suddenly lost synchronisation to the

Master.

Unknown: No current connection information from specific Base unit

Assisted lock: Base has lost DECT sync. source and Ethernet is used for

synchronization

Sync. Lost: Handset has an active DECT connection with the base. But the base

has lost DECT sync. source connection. The base will stay working as long as the

call is active and will go into searching mode when call is stopped.

Base Station

Name

Name from management settings.

5.12.5 DECT Chain

Below the Base Group Table is the DECT Chain tree. The DECT Chain tree is a graphical presentation of the

Base Group table levels and connections. Repeaters are shown with green highlight.

Screenshot: DECT Chain tree of above configuration