Owner's Manual

EXP1240 Admin Guide, Version 2.0
Proprietary and Confidential
Chapter: EXP1240 Administration Interface
52
Port
Emp
ty
The server p
ort number
that is open for
LDAP
connections.
Sbase
Empty
Search Base. The
criterion depends
on the configuration of the
LDAP server. Example of the setting is CN=Users, DC=umber,
DC=loc
LDAP filter
Empty
LDAP
Filter is used to as a searc
h filter, e.g. setting LDAP filter
to (|(givenName=%*)(sn=%*)) the IP-DECT will use this filter
when requesting entries from the LDAP server. % will be
replaced with the entered prefix e.g searching on J will give the
filter (|(givenName=J*)(sn=J*)) resulting in a search for given
name starting with a J or surname starting with J.
Bind
Empty
Bind is the username that will be used when the IP
-
DECT phone
connects to the server
Password
Empty
Password is the password for the LDAP Server
Name
Empty
The nam
e can be used to specify
if sn+givenName or cn
(common name) is return in the LDAP search results
Work Number
Empty
Work number
is used to specify that LDAP attribute that will be
mapped to the handset work number
Home
Number
Empty
Home number is used
to specify that LDAP attribute that will be
mapped to the handset home number
Mobile
Number
Empty
Mobile number is used to specify that LDAP attribute that will
be mapped to the handset mobile number
5.12 Multi-cell Parameter Definitions
In this section, we describe the different parameters available in the Multi-cell configurations menu.
5.12.1 Settings for Base Unit
Description of Settings for Specific Base units is as follows:
Screenshot