Owner's Manual

EXP1240 Admin Guide, Version 2.0
Proprietary and Confidential
Chapter: EXP1240 Administration Interface
42
Configuration
server
address
Empty
Server/device that provides configuration
file to base station.
Type: DNS or IP address
Permitted value(s): AAA.BBB.CCC.DDD or <URL>
Base Specific
File
Empty
Base configuration file
Multi Cell
Specific File
Empty
The file name must be the
chain id of the system
.
E.g 00087b0a00b3.cfg
Permitted value(s): Format of file is chain ID.cfg
Configuration
File Download
Disabled
Base Specific file:
Used when configuring a single cell base
Multicell Specific File: Used when configuring a multicell based
system
Base and Multicell Specific File: Used on out of factory bases to
specify VLAN and Multicell ID and settings.
SIP Log Server
Address
Empty
Permitted value(s):
AAA.BBB.CCC.DDD
or <URL>
Requires a predefined folder named: \SIP
Upload of SIP
Log
Disabled
Enable this
option
to save low level SIP
d
ebug messages to
the
server. The SIP logs are saved in the file format:
<MAC_Address><Time_Stamp>SIP.log
Syslog Server
IP-Address
NA
Permitted value(s):
AAA.BBB.CCC.DDD
or <URL>
Syslog Server
Port
NA
Port number of syslog server.
Syslog Level
Off
Off
:
No data is saved on syslog server
Normal Operation: Normal operation events are logged, incoming
call, outgoing calls, handset registration, DECT location, and call lost
due to busy, critical system errors, general system information.
System Analyze: Handset roaming, handset firmware updates status.
The system 42nalyse level also contains the messages from normal
operation.
Debug: Used by UNIDEN for debug. Should not be enabled during
normal operation.
Enable
Automatic
Prefix
Disabled
Disabled
: Feature
off.
Enabled: The base will add the leading digit defined in “Set Prefix for
Outgoing Calls”.
Enabled + fall through on * and #: Will enable detection of * or # at
the first digit of a dialled number. In case of detection the base will
not complete the dialled number with a leading 0.
Examples:
1: dialed number on handset * 1234 - > dialed number to the pabx
*1234
2: dialed number on handset #1234 - > dialed number to the pabx
#1234
3: dialed number on handset 1234 - > dialed number to the pabx
01234
Set Maximum
Digits of
Internal
Numbers
0
Used to detect internal numbers. In case of internal numbers no
prefix number will be added to the dialled number.
Set Prefix for
Outgoing Calls
Empty
Prefix number for the enabled automatic prefix feature.
Permitted value(s): 1 to 9999