Owner's Manual

EXP1240 Admin Guide, Version 2.0
Proprietary and Confidential
Chapter: EXP1240 Administration Interface
23
5.2 Home/Status
We describe the parameters found in the Welcome front end home/status of the EXP1240 Administration
Interface.
Screenshot
Parameter Description
System information
This base current
multi
-
cell state
Phone Type
Always IPDECT
System Type
This base customer configuration
RF Band
This base RF band
setting
Current local time
This base local time
RFPI-Address
This base RFPI addr
ess
MAC-Address
This base MAC address
IP-Address
This base IP address
Firmware version
This base firmware version
Firmware URL
Firmware update server address and firmware path on server
Base Station Status
“
Idle
”
: When no calls on base
“In use” : When active calls on base
SIP identity status
List of extensions present at this base station.
Format: “extension”@“this base IP address” followed by status to the
right. Below is listed possible status:
OK: Handset is ok
SIP Error: SIP registration error
Reboot
Reboot after all connections is stopped on base. Connections are active
call, directory access, firmware update active
Forced Reboot
Reboot immediately.