Owner's Manual

EXP1240 Admin Guide, Version 2.0

Proprietary and Confidential

Chapter: Installation of Base Stations

3.6 Login to Base EXP1240 Configuration Interface

STEP 1 Connect the Base station to a private network via standard Ethernet cable (CAT-5).

STEP 2 Use the IP find menu in the handset (Menu * 4 7 *) to determine the IP-address of the base

station by matching the MAC address on the back of the base station with the MAC address list in

the handset.

STEP 3 On the Login page, enter your authenticating credentials (i.e. username and password). By

default the username and password is admin. Click OK button.

STEP 4 Once you have authenticated, the browser will display front end of the EXP1240

Configuration Interface. The front end will show relevant information of the base station.