Owner's Manual

EXP1240 Admin Guide, Version 2.0
Proprietary and Confidential
Chapter: Installation of Base Stations
13
3.2 UNIDEN Base station Mechanics
The base station front end shows an LED indicator that signals different functional states of the base unit
and occasionally of the overall network. The indicator is off when the base unit is not powered.
The table below summarises the various LED states:
LED State
State
Unlit
No power in unit
Unlit/Solid red
Error condition
Blinking green
Initiali
z
ation
Solid
red
Factory reset warning
or long pres
s in BS reset button
Blinking red
Factory setting in progress
Solid green
Ethernet connection available (Normal operation)
Blinking red
Ethernet connect not available OR handset de/registration failed
Solid red
Critical error (can only be identified by
UNIDEN
Engineers). Symptoms
include no system/SIP debug logs are logged, etc.
Orange
Press reset button of base station.
3.3 UNIDEN Base Unit – Reset feature
It is possible to restart or reset the base station unit by pressing a button on the rear side of the unit.
Alternatively, it can be reset from the EXP1240 Configuration Interface. We do not recommend this; but
unplugging and plugging the Ethernet cable back to the PoE port of the base station also resets the base
unit.