Owner's Manual

EXP1240 Admin Guide, Version 2.0
Proprietary and Confidential
Chapter: Appendix B: Using Base with VLAN Network
106
• IP subnet-based VLAN: The NIC assigns a unique VLAN ID for each IP subnet it belongs to.
Therefore, the VLAN ID of outbound frames is different for different destination subnets.
An inbound frame is dropped if the IP subnet and VLAN ID do not match.
11.5 Base station Setup
After the admin have setup the Backbone switch, next is to configure the Base stations via HTTP interface.
STEP 1 Connect the Base station to a private network via standard Ethernet cable (CAT-5).
STEP 2 Use one of the two methods to find the base IP
STEP 3 On the Login page, enter your authenticating credentials (the username and password is
admin by default unless it is changed). Click OK button.
STEP 4 Once you have authenticated, the browser will display front end of the EXP1240
Configuration Interface. The front end will show relevant information of the base station.
STEP 5 Create the relevant SIP server information in the system. Each service provider/customer
should refer SIP server vendor on how to setup SIP servers.
11.6 Configure Time Server
STEP 6 Navigate to the Time settings and configure it. Scroll on the left column and click on Time
URL link to open the Time Settings Page. Enter the relevant parameters on this page and press the
Save button.