DSS3450 DSS3450+1 Owners Manual OWNER'S MANUAL
Contents Welcome Terminology used in this Manual Product Overview Parts of the Handset Parts of the Base Handset Icons The Standby Screen Using the Interface Using the Four-way Function Key Using the Handset Menus Entering Text from Your Handset Installing the Phone Choosing the Best Location Wall Mounting the Base Direct Wall Mounting Installing the Rechargeable Battery Connecting the Base and Charging the Handset Connecting to the Phone Line Installing the Belt Clip Testing the Connection Changing the Di
Deleting Phonebook Entries Deleting All the Phonebook Entries at Once Copying Phonebook Entries to Another Handset Customizing Your Phone Changing the Handset Banner Selecting Ring Tones Activating AutoTalk Activating Any Key Answer Using Your Phone Keypad Lock Making a Call from the Phonebook Making a Call with Speed Dial Making a Call with Base Speed Dial Switching to the Speakerphone During a Call Using Caller ID and Call Waiting Using the Caller ID List Making a Call from a Caller ID Record Deleting Cal
Maintenance Battery Replacement and Handling Battery Contact Maintenance Low Battery Alert Talk Time, Standby Time, and Storing the Handset on the Base Troubleshooting Resetting the Handset Resetting the Handset without the Base Changing the Digital Security Code Traveling Out of Range Common Issues Liquid Damage Specifications Index Warranty 46 46 46 47 47 47 47 48 49 49 49 52 53 54 55 [4]
Welcome Thank you for purchasing a Uniden Multi-Handset phone. This unit is different from conventional cordless telephones. When the base unit is connected to AC power and a telephone line, it can support up to 4 handsets. Using extra handsets, you can establish a 3-way conference call (2 handsets and an outside line), while two other handsets are making an intercom call.
Standby The handset is not in use. If it is off the cradle, no line has been activated. No dial tone is present. Station Any handset or the base. Talk A telephone line has been activated on the handset enabling a dial tone. Product Overview Main Features: ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! 2.
Parts of the Handset 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
Parts of the Base 25 26 27 43 42 28 29 30 24 31 33 32 34 24. Base charging contacts 25. Base Speaker 26. [memory] key 27. Charge LED 28. in use LED 29. Base Antenna ] keys 30. [ (Volume Up/Down) 35 36 40 38 39 37 41 31. [pause] key 32. [hold] key 33. [int'com/xfer] key (intercom/transfer) 34. [dnd] key and LED (do not disturb) 35. [*/tone] key 36. [#] key [8] 37. Base Microphone 38. [speaker] key and speaker LED (speaker) 39. [flash] key 40. [redial] key 41.
Handset Icons ICON B P STATUS DESCRIPTION Standby/Talk The battery icon indicates the handset battery status: full, medium, low, and empty. Standby The ringer off icon indicates that the ringer is turned off. Talk The mute icon appears when you mute the handset. Talk The boost icon appears when the Clarity Boost feature is activated. Talk The speaker icon appears when the handset speaker phone is in use. Talk The privacy icon appears when Privacy Mode is turned on.
The Standby Screen When the phone is in standby, the handset display shows the following items: [10]
Using the Interface Using the Four-way Function Key Your handset has a four-way function key that allows you to move the cursor on the display and access the most commonly used features at the touch of a button. By moving this key to the left, you open the Phonebook. Move the key to the right to access Caller ID information. To use this four-way key, place your thumb over the key on the handset and move to the four positions to get the feel of how it moves and operates.
Entering Text from Your Handset You can use the number keypad on your phone to enter text by referring to the letters printed on each number key. When you press the number key in a text entry field, the phone displays the first letter printed on the number key. Press the number key twice to display the second letter and three times to display the third. Capital letters are displayed first, then lower case letters, then the number on the key.
Installing the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: • The location should be close to both a phone jack and a power outlet that is not controlled by a wall switch. • The base and handset should be kept away from sources of electrical noise such as motors, microwave ovens, and fluorescent lighting. • Don't place the base in direct sunlight or subject it to high temperatures. The battery may not charge properly.
Wall Mounting the Base This phone can be mounted on any standard wall plate. 1. Snap the wall mount adapter into the notches on the base top. 2. Plug the AC adapter into the DC IN 9V jack. 3. Route the AC adapter cord through the molded wiring channel as shown. 4. Plug the AC adapter into a standard 240V AC wall outlet. 5. Plug the telephone line cord into the TEL LINE jack. 6. Plug the telephone line cord into the telephone outlet. 7.
Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: ! Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. ! Try to mount your phone within 1.5m of a working phone jack to avoid excessive lengths. ! Make sure the wall material is capable of supporting the weight of the base and handset.
Installing the Rechargeable Battery Use only the Uniden BT-909 rechargeable battery pack supplied with your cordless telephone. Follow the steps below to install a battery. 1. Press in on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2. Place the battery pack in the battery compartment with the connectors on the battery and on the compartment aligned . 3.
Connecting the Base and Charging the Handset 1. Connect the AC adapter to the DC IN 9V jack. 2. Connect the AC adapter to a wall outlet that is not controlled by a switch. 3. Place the handset in the base with the LCD screen facing forward. 4. Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts. 5.
Installing the Belt Clip 1. Line up the holes on each side of the handset. To attach the belt clip, insert into the holes on each side of the handset. Press down until it clicks. 2. To remove the belt clip , pull either side of the belt clip to release the tabs from the holes. Testing the Connection To test your connection try making a call. If your call connects, the settings are fine. If your call does not connect check the following: 1. Check the AC adapter cord.
Changing the Dial Mode (Australian Model Only) Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most phone networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you will need to change your phone’s dial mode. If you don't get a dial tone or can't connect to the telephone network, please follow the steps below to modify your phone’s settings: 1.
Activating Caller ID on Call Waiting Your phone supports Caller ID on Call Waiting (CIDCW), so you see the name and number of someone who calls when you're already on the line. You need to subscribe to these features with your phone company before you can use them. The Caller ID on Call Waiting service is currently unavailable in NZ. To let your phone support these features, follow the steps below: 1. Press [menu/clear]. Select the GLOBAL SETUP menu, then the CIDCW submenu. 2.
number into your phone, you can simply press [select/ ] to access your voice mail. When you subscribe to the service, your voice mail provider provides you with the access number and the required voice mail signaling tone. Notes: ! Voice Mail Access Numbers : Australia - Message Bank : 125101, Home Messages : 101 New Zealand - Call Minder : 083210 ! For New Zealand model, the Voice Mail Access Number is stored in the One-Touch Voice Mail key [Select/ ] and in speed dial location 4.
Activating Name Tag (POP ID) The Name Tag feature works with the Caller Display number from Caller ID. A subscription to the Caller ID service is required from your network provider. There is usually a fee for this service. When the phone rings the received Caller Display number is compared to numbers stored in the phonebook. If there is a match then any name stored with the phonebook number will be displayed. To turn Name Tag on or off, follow the steps below: 1. Press [menu/clear].
Adding Extra Handsets Your phone supports up to four handsets, including any handsets supplied with your phone. Accessory handsets do not need to be connected to a phone jack. You can now place a fully-featured cordless handset anywhere AC power is available to connect the handset charger. The accessory handsets connect to the base to make and receive calls just like the handset that came with the main base. All the handsets ring when you receive a call.
Registering Accessory Handsets If you purchase an accessory handset, you need to register the handset before use. Only one handset can be registered at a time. Handsets supplied with the phone are registered to the base by the factory. When charged, pre-registered handsets display a handset ID number. Handsets that have not been registered display MODELS VARY! CHARGE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER'S MANUAL.
Resetting Handsets If you want to register the handset to a different base or replace a handset with another one, you must first clear the registration information from the base and the handset. 1. Press and hold [ ] and [#/>] for at least 5 seconds, until the SYSTEM RESET menu appears. Select the DEREGISTER HS submenu. WHICH HANDSET? appears. 2. Move the cursor to select the handset ID to be de-registered from the list, and then press [select/ ] . DEREGISTER HS appears. 3.
Use the keypad to enter a name for this entry; the name can contain up to 16 characters. (See page 12 for entering text instructions.) If you do not want to enter a name for this entry, your phone stores this entry as . Press [select/ ] when you are finished. 5. Enter the number for this entry (STORE/EDIT NO.). Once you have stored a name, STORE/EDIT NO. appears. Use the number keypad to enter the phone number; the phone number can contain up to 20 digits.
Programming Base Speed Dial Numbers The dual- keypad phone can store 10 speed dial numbers, [0 ]to [9 ]. Follow the steps below to store new speed dial numbers in the base. ( Handset speed dial numbers are stored as part of a phonebook entry. See Creating Phonebook Entries on page 25 for information on programming handset speed dial numbers. ) 1. With the phone in standby, press [memory ]. 2. Use the number keypad to enter the phone number; the phone number can contain up to 20 digits.
Editing an Existing Phonebook Entry 1. With the phone in standby, press [ ] to open the phonebook. 2. Select DIAL/EDIT. 3. Use [ ] or [ ] to scroll through the phonebook entries. When you come to the entry you want to edit, press [select/ ]. Follow the steps for Creating Phonebook Entries on page 25. If you do not wish to change the information at any step, simply press [select/ ] to go to the next step.
Deleting All the Phonebook Entries at Once 1. When the phone is in standby, press [ ]. 2. Move the cursor to select DELETE ALL, and press [select/ ]. DELETE ALL? appears in the display. 3. Select YES, then press [select/ ]. A confirmation tone sounds, and DELETED! appears in the display. Copying Phonebook Entries to Another Handset If you have more than one handset, you can transfer stored phonebook entries from one handset to another without having to re-enter names and numbers.
Customizing Your Phone Changing the Handset Banner Each handset will display a banner name once it is registered to the base. The default banner is Handset #1, Handset #2, etc. You can change the name your phone displays by changing the banner display. If you have more than one handset, the banner name identifies your handset during handset-to-handset functions like intercom and DirectLink communication.
Selecting Ring Tones You may choose from 10 tones or 10 melodies for your phone's primary ring tone. Each station can use a different ring tone or melody.
Activating AutoTalk AutoTalk allows you to answer the phone simply by removing the handset from the cradle. You do not have to press any keys to answer the call. 1. Press [menu/clear]. 2. Select the HANDSET SETUP menu, and then the AUTOTALK submenu. 3. Select ON or OFF, and press [select/ ] . You will hear a confirmation tone. Activating Any Key Answer Any Key Answer allows you to answer the phone by pressing any key in the twelve-key pad. 1. Press [menu/clear]. 2.
Using Your Phone From a cordless handset From a handset speaker phone Making a call 1. Remove the handset from the charging cradle. 2. Press [ / flash] . 3. Listen for the dial tone. 4. Dial the number. OR 1. Remove the handset from the charging cradle. 2. Dial the number. 3. Press [ / flash] . 1. Remove the handset from the charging cradle. 2. Press [ ]. 3. Listen for the dial tone. 4. Dial the number. OR 1. Remove the handset from the charging cradle. 2. Dial the number. 3. Press [ ].
Keypad Lock Use Keypad Lock to disable key response. You can still answer calls, receive page and receive copy phonebook locations keylock will reactivate after these operations. To lock the keypad Press and hold [*/tone/<] until you hear a confirmation tone. KEYPAD LOCKED appears. If any key is pressed when keypad is locked, TO UNLOCK KEYPAD PRESS & HOLD KEY appears. * To unlock the keypad Press and hold [*/tone/<] again. KEYPAD UNLOCKED appears. Making a Call from the Phonebook 1. 2. 3. 4.
Using the Caller ID List You can store up to 100 Caller ID numbers in each handset. Your phone shares memory between your Phonebook and Caller ID entries. Once you reach your maximum phonebook entries of 100, Caller ID information will not be stored (but it will still display when the call comes in). To open the Caller ID list, press [ ] (on the right side of the four-way key). The phone will show the total number of stored Caller ID records.
Using Call Waiting If you have Call Waiting service and a second call comes in when you are on the phone, a call waiting tone will sound. For Australian Model: Press [ /flash] and then 2 on the handset OR [flash] and then 2 on the base to switch between callers. There is a short pause during the switch. For New Zealand Model: Press [ /flash] on the handset OR [flash] on the base to switch between callers. There is a short pause during the switch.
Redialing a Number Deleting a Redial Record If you want to delete a phone number from the handset's redial list, follow the steps below: 1. With the phone in standby, press [redial/pause]. 2. Use [redial/pause] or[ ] and [ ] to scroll through the redial list. 3. When you find the redial number you want to delete, press [menu/clear]. 4. Select YES, and then press [select/ ] or [menu/clear]. The redial number is deleted.
Adjusting the Earpiece and Speaker Volume You can choose from six volume levels for the earpiece and speaker. To adjust the volume while on a call, press [ ] to make it louder or [ ] to make it softer. Base Speaker : You can choose from ten volume levels for the base speakerphone. To adjust the speaker volume while on a call, press [ ]to make it louder or [ ]to make it softer.
Using Hold, Conference, and Transfer Placing a Call on Hold During a call, press [xfer/intercom] on the handset or [hold] on the base to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read LINE ON HOLD. To return to the party on hold, press [ /flash] or [ ] on a handset or [speaker] on the base. The phone returns to the holding party. Notes: ! You can only place a caller on hold for 5 minutes.
Transferring a Call You can transfer a call from one station to another. Answering a Transferred Call When a station receives a call transfer, it sounds a paging tone and shows the ID of the station that is paging. To accept the call transfer: 1. Press [ /flash] or [xfer/intercom] from the handset or [int'com/xfer] or [speaker] on the base. 2. To speak to the caller, press [ /flash] on the receiving handset or [speaker] on the base. 3.
Using Special Features Do Not Disturb ( All Calls) DND allows you to mute the ringer of all handsets and the base. With the phone in standby, press and hold [dnd ] on the base. A confirmation tone sounds and the [dnd ]LED illuminates. To cancel, press [dnd ]again. You can also mute the ringer tone while the phone is ringing by pressing [dnd ]on the base. Muting the Ringer (One Call Only) While a handset is ringing, press [ next call. ] on the handset to mute the ringer for this call.
Using the DirectLink Communication Feature Using the DirectLink feature, a pair of handsets can function as two-way radios. You can have up to two pairs of handsets using DirectLink at a time. DirectLink communication does not interfere with the main base's ability to make or receive telephone calls. You must set both handsets to use DirectLink communication to activate this feature.
Making a DirectLink Call 1. To call another handset with DirectLink communication, press [ /flash]. 2. The display shows TO DIRECTLINK A HANDSET PRESS [1-4]. 3. Press the number of the handset you want to call. If the handset is out of range or not using DirectLink communication, the display shows UNAVAILABLE. To answer a DirectLink call, press [ /flash] or if Any Key Answer is on, press any key of the twelve-key pad. 4. To exit the DirectLink call, press [ ].
Answering an Intercom Page When the intercom page tone sounds, the display shows the ID of the station that is paging. From the handset, press [ /flash] or [xfer/intercom]. If AutoTalk is on, the handset automatically answers the page when you remove the handset from the cradle. If Any Key Answer is on, press any key of the twelve-key pad. From the base, press [int'com/xfer], or [speaker]. To hang up an intercom page from the handset, press [ ].
Tone Dialing Switch Over (Australian Model Only) If your telephone company requires pulse dialing, you can switch to tone dialing after the call connects. This feature is useful when you need tone dialing to use automated menu systems, such as telephone bank tellers, telephone prescription refills, customer support menus, etc. If your phone is set to pulse dialing, make your call normally. Once your call connects, press [*/tone/<] on the handset (or [*/tone] on the base).
Maintenance Battery Replacement and Handling With average use, your phone's battery should last approximately one year. To order replacement batteries, please visit www.uniden.com.au (Australian Model) or www.uniden.co.nz (New Zealand Model). Battery Contact Maintenance To maintain a good charge, clean the charging contacts on the handset once each month. Dampen a cloth with plain water. Gently rub the damp cloth over the charging contacts until all visible dirt is removed.
Low Battery Alert When the battery pack is very low, the phone is programmed to eliminate functions in order to save power. The battery pack needs to be charged when the empty battery icon appears. When LOW BATTERY appears in the display and the phone is in standby, none of the keys will operate. If you are on a call, complete your conversation as quickly as possible, and return the handset to the charging cradle.
To reset the handset, do the following: 1. Press and hold [ ] and [#/>] for at least 5 seconds until the SYSTEM RESET menu appears. Select DEREGISTER HS submenu. WHICH HANDSET? appears. 2. Move the cursor to select the handset ID to be deregistered from the list, and then press [select/ ]. DEREGISTER HS appears. 3. The phone will ask you to confirm the deregistration. Move the cursor to YES, and then press [select/ ] . You will hear a confirmation tone.
Changing the Digital Security Code The digital security code is an identification code used to connect the handset and the base. Your unit ships from the manufacturer with a preset security code. Resetting this code is not normally necessary. In the rare situation that you suspect another cordless telephone is using the same security code or if you are instructed to change this code by a manufacturer’s Call Center Representative, you can change the code. To change the digital security code: 1.
Symptom Suggestion Can't make or receive calls. • • • • • • Severe noise interference. • • Make sure that you are not too far from the base. Make sure the line is not in use. If an outside call is already using a line, you cannot use that line to make another outside call. Check both ends of the base telephone line cord. Make sure the AC adapter is plugged into the base and wall outlet. Disconnect the AC adapter and reconnect. Change the Digital Security Code (see page 49).
Symptom Suggestion The handset doesn't communicate with other handsets. • • Change the Digital Security Code (see page 49). Make sure that you have registered all handsets. An extra handset can't join the conversation. • • Make sure there are not two handsets already using the conference feature. Make sure that another handset is not in privacy mode. Room Monitor does not work. • Make sure to place the handset(s) within the range of the base.
Liquid Damage Moisture and liquid can damage your cordless phone. Follow the suggestions below if your phone gets wet: Exterior If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal. Interior If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base): Handset Base 1.
Specifications Operating Temperature AC Adapter Battery 0° C to +50° C (+32° F to +122° F) Part Number Base: AAD-041S Charging cradle: AAD-600S Input Voltage Base: 240V AC, 50 Hz Charging cradle: 240V AC, 50 Hz Output Voltage Base: 9V DC @ 350 mA Charging cradle: 9V DC @ 210 mA Part Number Capacity BT-909 3.6V DC @ 600 mAh Notes: ! Use only the supplied AAD-041S and AAD-600S adapters. ! Do not use any other AC adapter.
Index A B C D E F Adjusting Audio Tone Answering a Call Any Key Answer AutoTalk Battery Contact Maintenance Battery Replacement and Handling H 38 33 32 32 46 46 I K Caller ID on Call Waiting Clarity Boost 20 38 L Day and Time Deleting a Redial Record Deleting Caller ID Numbers Dial Mode Digital Security Code DirectLink Distinctive Ring Do Not Disturb 19 37 35 19 49 42 20 41 M Earpiece Volume Entering Text from the Handset 38 12 Four Way Function Key 11 N O P Handset Banner Hanging Up 3
One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited Warranty is only valid in the original country of purchase.
THANK YOU FOR BUYING A UNIDEN PRODUCT. © 2006 Uniden Australia Pty Limited. Uniden New Zealand Ltd.
