Owner`s manual

Hold, Conference, Transfer, and Intercom
Press [xfer/intercom]. If you leave a caller on hold for
Put a call on more than five minutes, the call will be disconnected.
hold
To return to the party on hold, press [C/flash] or [mq].
Join an in- To join a call already in progress, press [C/flash] or
progress call [ mq]. You can hang up normally; the other station
remains connected to the call.
Transfer a call
Cancel a
transfer
Accept a
transferred
call
Make an
intercom page
Press [xfer/intercom]; the call is placed on hold. Use
[_] or [V] to select the station you want to transfer
the call to, and press [select/FTi]. (To page all
stations at once, select ALL.) When the other station
answers, you can talk to the station; the outside call
remains on hold. If the other station accepts the call,
you will be disconnected.
To cancel the transfer and return to the call, press
[€/flash] or [ m_].
To answer the transfer page and speak to the
transferring station, press [€/flash] or [xfer/intercom].
To accept the call and spea]_ to the caller, press
[_/flash] again.
With the phone in standby, press [xfer/intercom].
Use [_] or [V] to select the station you want to talk
with, then press [select/E_]. (if you select ALL, all
other stations will be paged.)
Cancel a page To cancel the intercom page, press [_].
Answer an Press [_/flash] or [xfer/intercom]. If AutoTalk is on,
intercom page the handset automatically answers the page when
you remove it from the cradle.
Muting the Ringer (One Call Only)
While the handset is ringing, press [,]}] to mute the ringer for
this call. The phone will ring again on the next call. (The
handset must be off the cradle to mute the ringer.)
11