Specifications

Installing the Phone

If the display shows REGISTRATION FAILED, repeat the process again.

Note: If a handset has ever been registered to a base, reset the handset before you register it to a new base (see

Resetting the Handset on page

55). Or to use multiple bases, see the next section.

Using Multiple Bases

The handsets supplied with your phone (or any DCX300 accessory handsets) can be registered to a total of four

different bases. Compatible bases include the DECT2060, DECT2080, DECT2085, DECT2088, and DECT3080

models. Once your handset is registered to more than one base, you can set the handset to search automatically the

available base, or you can select manually which base the handset should connect to (for example, if you have one

base with an answering machine, you can tell the handset to connect that base to check messages).

Note: To conrm how many bases the handset is registered to, open the SELECT BASE submenu (follow the step

1 of Selecting the base on page 1

4). Press [ ] to close the list and return to standby.

Registering the handset to another base

Make sure the handset battery is fully charged.

To register a handset to DECT2060 , DECT2080 or DECT3080 base:

Disconnect the base AC adapter. Then press and hold

[nd hs] or [nd] while you reconnect the adapter.

Keep pressing

[nd hs] or [nd] until the charge LED starts to blink.

To register a handset to DECT2085 or DECT2088 base:

With the phone in standby, press

[Menu/Select] on the base. Move the cursor to select the REGISTER

HANDSET menu, and then press

[Menu/Select]. HANDSET REGISTERING will appear.

On the handset, press

[Select/menu]. Select the REGISTER BASE menu. HANDSET REGISTERING will

appear in the display. (After step 2, you have thirty seconds to complete this step 3 before the system returns to

standby.)

Wait approximately thirty seconds. “REGISTRATION COMPLETE” will be displayed to indicate the handset has

been registered to the base and a handset ID will be automatically assigned.

If the display shows REGISTRATION FAILED, repeat the process again.

•