Specifications

Settings menu
Tones
You can switch on or off the tones for key touch,
confirmation, call waiting, and out-of-range alarm.
For example, when the key tone is set to ON, you
will hear a tone each time you press a keypad
button.
1 Press
to access the main menu.
2 Press or until Audio Setting is
displayed and press .
3 Press until Tones is displayed. Press .
4 Press or to select the option you want
Key
Confirmation
Warning
Call Waiting
Range Alarm
Press
.
5 Press
or to display either On or
Off and press to confirm. For Key tone,
select from pattern 1-3 or off and press .
6 Press to exit and return to standby.
Dial mode
You can set your phone to use either Tone or
Pulse dialing. The pre-set setting is TONE dialing,
where you will hear a tone beep each time you
dial a number. Most modern exchanges and
switchboards use Tone dialing, so you should not
need to change this setting. Only change it if your
switchboard uses Pulse dialing or if you cannot
make a call using Tone dialing.
1 Press
to access the main menu.
2 Press or until Base Settings is
displayed and press .
3 Press or to select Additional and
press .
4 Press or to display Dial Mode and
press . The current setting is displayed.
[26]