Owner's Manual

3
Registering to a Base
#
The accessory handset won't work until you register it to a base!
Compable Bases
ThishandsetisdesignedforusewithUniden'sDECT3380
base.OtherUnidenDECT6.0basesmightbecompatiblewith
thishandset.Forthemostup-to-datelistofwhichbasesthis
handsetiscompatiblewith,seeourwebsite.
Registraon Methods
Therearetwodifferentregistrationmethods,butit'seasyto
figureoutwhichoneappliestoyourhandsetandbase.Answer
thequestiontoregisterthehandsettooneofthecompatible
bases.
Does the handset t in the base cradle?
Yes Place the handset in the base. The display should say
Handset
Registering
.
No 1. On the base, press and hold
FIND
when the phone is in standby
(about 5 seconds).
2. On the handset, press and hold
POUND (#)
until the handset
display says
Handset Registering
(about 2 seconds).
#
After about 30 seconds, the handset display should say
Registration Complete
.
Test the connecon
Pickupthehandsetandpress
TALK/FLASH
.Makesureyou
getadialtone.(Press
END
tohangup.)
If... Try...
-
you don't hear a dial tone
-
the display says
Registration Failed
Making sure the handset is fully
charged, then trying again.