Owner's Manual

2
Installing Your Handset
Charge the Baery
1. Unpackthehandset,
batterypack,andbattery
cover.Ifthebatterycover
isalreadyonthehandset,
pressinonthenotchand
slidethecoverdownand
off.
2. Lineupthebatterypack
connectorwiththejackinsidethehandset.(Thebattery
connectorwillonlyfitoneway.)
3. Pushthebatterypackconnectorinuntilitclicksintoplace.
Tuggentlyonthewirestomakesurethebatterypackis
securelyconnected.
4. Placethecoveroverthebatterycompartmentandslideit
upintoplace.
5. ConnecttheACadaptertothecharger's
AC IN 8V
jackand
setthecordintothenotch.(Thisadaptermightalreadybe
connected.)
6. Plugtheotherendoftheadapterintoastandard120VAC
poweroutlet.
7. Placethehandsetinthechargerwiththedisplayfacing
forward.Thedisplayonthehandsetshouldlightup;ifit
doesn't,reseatthehandsetortrypluggingtheACadapter
intoadifferentoutlet.
#
Charge the handset completely (about 15 hours) before using it.