User`s guide

English - 19
Programming a Security Code
Withthephoneinstandby,openthemenu;select Answering Setup ,thenselect
Security Code .Usethenumberkeypadtoenteratwo-digitsecuritycode( 01 to 99 ).
Press MEnu/SELEcT whenyou’refinished.
# Remember to make a note of your new security code!
Dialing In to Your System
1. Callyourphonenumber&waituntilthesystemanswers.(Ifthesystemisturned
off,itanswersafter10rings&soundsaseriesofbeeps.)
2. Duringthegreetingorbeeps,press
0
andimmediatelyenteryoursecuritycode.
Ifyouenteritincorrectly3times,thesystemhangsupandreturnstostandby.
3. Thesystemannouncesthetime,thenumberofmessagesinmemory,andahelp
prompt.Itbeepstoletyouknowit'swaitingforacommand.
4. Whenyouhearbeeping,entera2-digitcommandfromthechart.
# If you don't press
any keys for 15
seconds, the
system hangs up
and returns to
standby.
IMPORTANT INFORMATION
Solving Problems
Ifyouhaveanytroublewithyourphone,checkthissectionfirst.Ifyouneedhelp,
callourCustomerCareLinelistedonthefrontcover.
General problems Possible solutions
No handsets can make or
receive calls.
x Check the telephone cord connection.
x Disconnect the base AC adapter for a few minutes;
then reconnect it.
A handset can’t make or
receive calls.
x Move the handset closer to the base.
A handset can make calls,
but it won’t ring.
x Make sure the ringer is turned on.
x Make sure Silent Mode is turned off (see p. 15).
A handset is not working.
x Charge the battery for 15-20 hours.
x Check the battery connection.
The phone keeps ringing
when I answer on an
extension.
x You may have to change the line mode. Contact
Customer Service for instructions.
01 Repeat message 05 Stop playback
02 Play message 06 Turn the system on
03 Skip message 09 Turn the system off
04 Delete message 10 Hear help prompts