User`s guide

English - 13
USING SPECIAL FEATURES
Silent Mode
Youcansilencetheringersonthebaseandallhandsetsforaspecificperiodoftime;
theansweringsystemanswersanyincomingcallswithoutplayinganythingthrough
thespeaker.
1. Withthephoneinstandby,pressandhold
#
onanyhandset.Thephoneprompts
youtoselectthenumberofhours( 1 - 9 or Always On )thatyouwantittostayin
silentmode.
2. Toconfirm,press
MEnu/SELEcT
orjustwaitabout5seconds.Thephoneturnson
theansweringsystemanddisplays Silent Mode On oneachhandset.
3. Aftertheselectednumberofhours,thephoneautomaticallyexitssilentmode.To
exitsilentmodemanually,pressandhold
#
again.
# If the phone is in silent mode and you turn off the answering system, the
phone exits silent mode.
Call Block
IfyousubscribetoCallerID,youcansavephonenumberstothecallblocklist.
Whenacallcomesin,thephonecomparesthereceivedphonenumbertothe
numbersonthecallblocklist.Ifthephonenumberisonthelist,thephonereplaces
thecaller'snamewith Call Blocked andblocksthecall.
Thecallblocklistholds30entries,andallhandsetssharethesamelist.Youcan
addentriesbyselecting
Add Call Block intheCIDmenuthatdisplaysafteryouhave
viewedtheCIDrecordorthroughthe Call Blocking menu(seebelow).(Onlyone
handsetcaneditthecallblocklistatatime.)
Call Blocking Menu Options
Withthephoneinstandby,openthemenuandselect Call Blocking .Chooseoneof
theseoptions:
Menu Option What it does
View Number See the numbers on your call block list.
Create New
Add an entry to your call block list. The phone will prompt
you to enter a name & phone number.
Private Number
Block all calls from numbers reported by CID as "Private."
(This does not count as one of the 30 entries.)
Unknown Number
Block all calls from numbers reported by CID as
"Unknown." (This does not count as one of the 30 entries.)
Call Blocking Entry Options
Withthephoneinstandby,openthemenu,select Call Blocking/View Number ,and
scrollthroughtheentries.Press MEnu/SELEcT toopentheindividualentry.Choose
oneoftheseoptions: