User guide

Adjusting Volume
Use your home phone’s volume adjustment if available. Alternately,
the volume of the Wireless Home Phone Base can be adjusted if
necessary. While on a call, press ** or ## to enter Volume Setting
Mode. Press * to decrease volume. Press # to increase volume.
To exit Volume Setting Mode press any other key or wait five (5)
seconds.
Notes:
• Four volume levels are available (level 1 to level 4); the default
setting is the highest at level 4.
• Your home phone(s) may have a separate volume level setting
function that is independent of the Wireless Home Phone Base.
Powering On/Off
The On/Off button is used to turn your Wireless Home Phone Base
on or off . When powered off, the Wireless Home Phone Base will no
longer send or receive calls, but it will continue to charge the back-up
battery if still connected to the wall outlet.
To turn the Wireless Home Phone Base on, press and hold the
On/Off button for five (5) seconds until the signal strength light
turns on. To turn it off, press and hold the On/Off button for five
(5) seconds and wait a moment for the Battery and Signal Strength
indicator lights to turn off (Power light remains on when connected
to an AC power source).
AT&T 3G MicroCell™
Wireless Home Phone Base can be used with the AT&T 3G MicroCell
when it’s within range of the MicroCell signal and the phone number
associated with the Wireless Home Phone Base has been added to
the MicroCell’s approved user list. To update your approved user
list, visit att.com/3GMicroCell and click “Manage Settings.”
The signal strength indicator on your Wireless Home Phone Base
will flash green when connected to the MicroCell.
13Using Your Device