User guide

Turn on Your Device
Plug the power cord into an electrical wall outlet that is not
controlled by a wall switch.
Insert the small end of the power cord into the Power Input
port on the back of your Wireless Home Phone Base.
Press and hold the On/Off button for five (5) seconds until the
signal strength light comes on.
Check the Wireless Signal
Raise antenna to an upright position.
Confirm signal strength light is green for optimal performance.
Yellow indicates a moderate signal and may be sufficient.
Note: If you do not see a green light (strong signal), you may
6 Getting Started
On/Off
Press and hold 5 seconds